|Name:||Clog (Asymmetric D) (2200) v3|
|Nose:||notch & pin|
|Dimensions:||Length: 110.86 mm|
Width: 56.6 mm
Rope Bearing Depth: 8.36 mm
Gate Opening: 16.4 mm
|Strength Ratings:||2200 -|
|Other Markings:||Forged: CLOG 2200 WALES|
|Summary:||classic compact asymmetric d with large solid gate|
|Description & Commentary:|
Classic compact D carabiner, with a gate made from uncommonly large 12.7mm diameter round bar stock.
Interestingly, the grooves on the gate are made with 3 different profiles. The top two grooves are angled 45 degree towards each other, forming a chamfered cylinder between them. The bottom groove is a square sided flat bottom groove.
This example is almost identical to another Clog 2200, with two differences: The angled end of the nose, and the flat bottom of the gate hinge area.